JenkinsCrew 110 Gallon Oceanic Mixed Reef Build

Yes, I have read many of Marc's articles and found them highly beneficial. Rather than hijack JenkinsCrew's thread I will pick this thought up again when I get to this stage in my build thread. Thanks all!


Sent from my iPhone using Tapatalk
 
Absolutely. Your thread has provided many great ideas. You will see many of them repeated.


Sent from my iPhone using Tapatalk
 
No budge in parameters yet, maybe see some tomorrow....

bb0646c0dfa271dbc298998b1e84b5f9.jpg
alt="">
 
Anyone know where I can get a John Guest fitting that will slip into a 1/2" PVC valve? I think I saw some on Ben's manifold but can't find them anywhere... :-(
 
https://www.walmart.com/ip/John-Guest-Usa-PSEI482024P-1-2in-CTS-X-1-2in-NPT-Male-Fixed-Elbow/21800339?wmlspartner=wlpa&selectedSellerId=335&adid=22222222228016810800&wl0=&wl1=g&wl2=m&wl3=51752521031&wl4=pla-83139826031&wl5=9026890&wl6=&wl7=&wl8=&wl9=pla&wl10=111830463&wl11=online&wl12=21800339&wl13=&veh=sem
 
Well Ammonia is up so shrimp are out and tank is continuing to cycle.

I got my order into Marc for a custom ATO container so hopefully can get the ATO hooked up this weekend.

Still working on running and organizing electric and planning for equipment. Coming along though!
 
Thanks guys!

Well Nitrite is on the rise and ammonia is going down so the cycling is going well!

I had also been seeding a little bag of Seachem Matrix biomedia in one of the biocubes for about a month. I threw that in the refugium section of the sump the day before I took out the shrimp so should have plenty of bacteria going in the tank.

Sent from my SM-G935T using Tapatalk
 
Thanks Jim! Yes very happy to finally have the tank up and running. Cant wait to put the first fish.Today I got the temp and Ph probes installed and calibrated. Gonna work on a skimmer stand because my skimmer sits a little to low.
 
Also got my new Melevs Reef ATO container. Thanks Marc!The ATO is all installed, container filled and doing its job! :)
369fa5c4dd3a6888b2325ed935fbb8c8.jpg
alt="" />
 
@jenkinscrew wrote:
Anyone know where I can get a John Guest fitting that will slip into a 1/2" pvc valve? I think I saw some on Ben's manifold but can't find them anywhere... [smilie=sadsmile.gif] said:
I ended up getting a 1/2" MIP to 3/8" rigid tubing adapter at Home Depot in the plumbing aisle with the rest of the quick connect (guest) fittings

They have 1/4" 3/8" and 1/2" guest


Sent from my iPhone using Tapatalk
Click to expand...
 
You must log in or register to reply here.
Top