Modifications to my ACIII Pro Program

[mitch91175]

Okay guys and girls. I haven't messed with my ACIII program since I set it up. I really need some assistance on this to get the power heads (2 Tunze 6201s) functioning properly. I have the controller on a 210 gallon. here is what I have pieced together from other programs:

LT1$-D01
LT2$-D02
LT3#-D03
HET%-A01
CHL%-D04
RFG%-A06
SKM%-A05
OZN&-A04
CO2&-A02
ALM&-A09
TZ1$-E01
TZ2$-E03
MON$-B01

If Time > 08:30 Then LT1 ON
If Time > 19:00 Then LT1 OFF
If Time > 09:30 Then LT2 ON
If Time > 20:30 Then LT2 OFF
If Time > 10:30 Then LT3 ON
If Time > 21:00 Then LT3 OFF
If Time > 08:30 Then RFG OFF
If Time > 21:00 Then RFG ON
If Moon 000/000 Then MON ON
If Temp < 70.0 Then HET OFF
If Temp < 70.0 Then LT1 OFF
If Temp < 70.0 Then LT2 OFF
If Temp < 70.0 Then LT3 OFF
If Temp < 70.0 Then CHL OFF
If Temp > 90.0 Then HET OFF
If Temp > 90.0 Then LT1 OFF
If Temp > 90.0 Then LT2 OFF
If Temp > 90.0 Then LT3 OFF
If Temp > 90.0 Then CHL OFF
If Temp > 80.0 Then CHL ON
If Temp > 84.0 Then CHL OFF
If Temp > 83.0 Then ALM ON
If Temp < 78.5 Then CHL OFF
If Temp > 80.0 Then LT1 OFF
Max Change 030 M Then LT1 ON
If Temp > 81.5 Then LT2 OFF
Max Change 030 M Then LT2 ON
If Temp > 82.5 Then LT3 OFF
Max Change 030 M Then LT3 ON
If Temp < 77.0 Then HET ON
If Temp > 78.0 Then HET OFF
If FeedA 000 Then TZ1 OFF
If FeedA 000 Then TZ2 OFF
If ORP < 445 Then OZN ON
If ORP > 450 Then OZN OFF
If pH > 08.45 Then CO2 ON
If pH < 08.35 Then CO2 OFF
If Time > 00:00 Then ALM OFF
If pH > 08.50 Then ALM ON
If pH < 08.00 Then ALM ON
If ORP > 470 Then ALM ON
If ORP < 300 Then ALM ON
If Time > 00:00 Then SKM ON
If Time > 08:00 Then TZ1 PF1
If Time > 08:00 Then TZ2 PF1
If Time > 21:00 Then TZ1 PF3
If Time > 21:00 Then TZ2 PF3
If Time > 02:00 Then TZ1 PF4
If Time > 02:00 Then TZ2 PF4
Pmp MODE sd for PF1
Pmp Int 000/100 for PF1
Pmp OSC 20/20/00 for PF1
Pmp MODE Sd for PF2
Pmp Int 000/060 for PF2
Pmp OSC 00/20/20 for PF2
Pmp MODE SD for PF3
Pmp Int 000/030 for PF3
Pmp OSC 00/40/40 for PF3
Pmp MODE Sd for PF4
Pmp Int 030/050 for PF4
Pmp OSC 00/40/40 for PF4



I know there are things that I can do better than what is above. What I would like to really focus on are the tunzes. What can I do better to get really good flow from them.

 

[Ashlar]

edit your post and click 'disable html' and then re-paste your program. (phpbb munges the into html.)

 

[mitch91175]

@Ashlar wrote:

Is that better. Any help would be appreciated.

 

[Ashlar]

Much better! I don't have the aquasurf module, nor any tunze equipment, but at least the program looks good

 

[mitch91175]

@Ashlar wrote:

Thanks.

 

[DaveJ]

What are you trying to do with the Tunze's?? Here are mine.. I have two 6055's on the frag tank...

TNZ$-E01
TN2$-E02

Lights on... daytime basically.

If Timer LT2 = ON Then TNZ PF1
If Timer LT2 = ON Then TN2 PF2

Alternate pumps 25% to 35% back and forth every 10 seconds. The MODE sd turns left on while Sd turns right off. Int 025/035 is intensity range. If you want both on at the same time use Sd on both.

Pmp MODE sd for PF1
Pmp Int 025/035 for PF1
Pmp OSC 10/10/00 for PF1
Pmp MODE Sd for PF2
Pmp Int 025/035 for PF2
Pmp OSC 10/10/00 for PF2

Lights off.... nighttime. 25% min and 25% max.

If Timer LT2 = OFF Then TNZ PF5
If Timer LT2 = OFF Then TN2 PF6
Pmp MODE sd for PF5
Pmp Int 025/025 for PF5
Pmp OSC 10/10/00 for PF5
Pmp MODE Sd for PF6
Pmp Int 025/025 for PF6
Pmp OSC 10/10/00 for PF6

 

[timthetoolman]

Can you do an oscillating pump mode with Koralias?

 

[DaveJ]

@timthetoolman wrote:

No Koralias are not hooked into the aquasurf, its tunze only.