kelipalmer
Premium Member
My Jebao rw-8 stopped working. All the lights on the controller appeared normal but no impeller movement. I disconnected it and took it apart and cleaned everything. With everything cleaned and reassembled, now the green power light on the power supply blinks and only the "H" light (mode) faintly blinks. Tested power supply and it is good. If i disconnect the pump assembly from the controller and add power to the controller, everything lights up normally.
I think my pump is shot. Any ideas?
Sent from my iPhone using Tapatalk
I think my pump is shot. Any ideas?
Sent from my iPhone using Tapatalk