Anyone set up one of these fuge/sump. I had to set mine up kind of weird. There is a small reservoir 4x4(back left corner) that I think is for drain from tank. It has 2 holes that feed into two different sections, one section is 14Lx10w(front and L). the other is 17.5Lx4.5w(back and center). Due to the size of my skimmer I had to set the fuge up on the smaller section. there are 2 more sections in this sump the 14x10 drains into an 8x10(front center) that is set up with filter/bioballs/activated carbon. then the 8x10 and 17.5x4.5 both drain into the return section that is about 14.5x8.5(Right side front to back). I would like to have a larger section for the fuge and skim out of a smaller section, but and drawing a blank on how to change it where everything still fits. If anyone has ideas I would love to hear them....BTW hope I didn't confuse to much with the numbers. () for where each section is located on sump.
