Howdy,
Getting a little more of the automation setup on the tank and am working on the auto water change system. I would like to use a feed program to execute the auto water change(ok so not really 100% auto). I am using peristaltic pumps for this set-up and would like to see what others would recommend for this task. Here's what I would like the program to do, any help is appreciated.
1. Turn first pump on
2. Wait XXX minutes then start second pump(first pump still on)
3. Once both pump are on have then run XXX minutes
4. After XXX minutes check float valve, if switched stop both pumps
5. After XXX minutes check float valve, if not switched stop pump two and continue running pump on until float valve is switched.
Cheers,
Getting a little more of the automation setup on the tank and am working on the auto water change system. I would like to use a feed program to execute the auto water change(ok so not really 100% auto). I am using peristaltic pumps for this set-up and would like to see what others would recommend for this task. Here's what I would like the program to do, any help is appreciated.
1. Turn first pump on
2. Wait XXX minutes then start second pump(first pump still on)
3. Once both pump are on have then run XXX minutes
4. After XXX minutes check float valve, if switched stop both pumps
5. After XXX minutes check float valve, if not switched stop pump two and continue running pump on until float valve is switched.
Cheers,