H Hookem2006 Premium Member May 6, 2012 #2 If it doesn't have an internal pump, than it doesn't matter.
J J.Davis Membership Expired May 10, 2012 #3 Thanks. Everything seems to come on and the compressor cycles, but won't cool. Is this something as simple as needing freon? Sent from my iPhone using Tapatalk
Thanks. Everything seems to come on and the compressor cycles, but won't cool. Is this something as simple as needing freon? Sent from my iPhone using Tapatalk
S silveradobobby Premium Member May 10, 2012 #4 Depending on your location if u can bring it to me I can check it out for you
J J.Davis Membership Expired May 11, 2012 #5 Thanks Bobby.. but 6 hours round trip kinda takes all the fun out of it.
D dahenley May 11, 2012 #6 If the ports are on top of the drum, it doesn't matter. If the go in the side, then the bottom is the input. The lowest is always the input. That way you never end up with a bubble and prevents freezing within
If the ports are on top of the drum, it doesn't matter. If the go in the side, then the bottom is the input. The lowest is always the input. That way you never end up with a bubble and prevents freezing within
D dahenley May 11, 2012 #7 Some say if you take the outside cover off. And if its used, I would clean the fan and coils with air while your in there. It will help it cool better. Plus you can ensure the fan spins freely.
Some say if you take the outside cover off. And if its used, I would clean the fan and coils with air while your in there. It will help it cool better. Plus you can ensure the fan spins freely.
J J.Davis Membership Expired May 13, 2012 #8 Thanks David- I'll try cleaning it up & see if that'll do it.
