Matthew's UPGRADE

M

Matthew_sample

Last Couple days i have been working hard...

I bought the 112 Rimless with a Safire Glass Front that was posted...

Here it is.. Now obviously i still have to wait for the water to clear up so I can do the rock work that you can not see any way...

I have 4 power heads running in it right now keeping the dust up so I can filter it out.

I have a large Canister running Carbon filtration
My 30 Gal Sump ... because my 40 long would not fit.

UV and Chiller connected to the return for now..
I will be taking my Chiller out of line once my LED Stands are done... For right now...
Plan is to get my LED stand welded and put in then take it off line ..
In the mean time... I will actually be putting my T5 Hood from the old tank on back wards lol

OK.. now pics...

[attachment=2]in garage 4 cleaning.jpg[/attachment]
[attachment=1]in office.jpg[/attachment]
This one is after we moved it into my Office...
[attachment=0]father in Law strech after moving tank lol.jpg[/attachment]
 
Also as I posted earlier.. I have replaced all base rock with FIGI...
[attachment=2]FIGI to replace base rock.jpg[/attachment]

I also put egg crate on the tank bottom under the sand bed..
[attachment=1]my office now...jpg[/attachment]

AND made a big mess in my office
[attachment=0]my mess after i cleaned it.jpg[/attachment]
 
Plumbing

I changed the plumbing it had...

my Tank out put now has valve control as it did before ..
I have taken the larger one and turned it into the main drain and the smaller one as the emergency only drain.

I will get PICS of top plumbing when the water clears..
[attachment=2]from tank.jpg[/attachment]

On the return side i have placed the chiller as stated in line Before the UV which i mounted...
And i used tube plumbing so that I can quickly take the chiller out as i want.. Once my LED Stands are ready
[attachment=2]from tank.jpg[/attachment]

I put the return control valve on the back side ...
[attachment=0]back return.jpg[/attachment]
 
Now after all that...
I still have to wait for the water to clear up...

I changed the return output to a dual output ...
one going to the front of the tank and one angled at 45 % To the opposite corner.
I also have 2 power heads blowing the back glass to reduce build up
And 2 more power heads blowing across the center of the tank.

Once my water clears up I will give you more pics...
BUT FOR NOW... i am off ...

THANK YOU FOR MY TANK !!!!!

P.S. If you are looking for a nice 75 .... i may know were to find one .. lol
 
You must log in or register to reply here.
Top