So, all my SPS are dying.
2 and a half weeks ago, i did red bug treatment and everything was fine. All the acros started looking better.
4 days later, I did a flatworm exit treatment. I did 40% more of the treatment than recommended because not all of the flatworms were dead; as the instructions recommended. I put in a HUGE bag of carbon, and a 30% water change. the water became crystal clear.
I took out the bag of carbon after 24 hours because I figured the light shock would hurt the acros, I've heard of it before.
A week later, I put in about half as much carbon, and phosban.
By the end of the week, all my monti's were dead. Today, I woke up and my favorite millepora was dying.
I kept up with my dosing, and my weekly water changes. For the past 4 months, my water parameters have been PERFECT.
Today's water test gave me..
Nitrates: 0
Phosphates: 0
Calcium: 410
Alkalinity: 9.3
Magnesium: 1330
Salinity: 1.026
I'm sure the FWE was a problem, but why are MY SPS STILL DYING.
I should add that my equipment is a 250w Lumenmax 3 pendant w/ an EVC 20k bulb powered by an icecap ballast. I have a Warner Marine H1 HOB skimmer, and two Vortech MP10s creating perfect flow on a 28 gallon nano cube.
2 and a half weeks ago, i did red bug treatment and everything was fine. All the acros started looking better.
4 days later, I did a flatworm exit treatment. I did 40% more of the treatment than recommended because not all of the flatworms were dead; as the instructions recommended. I put in a HUGE bag of carbon, and a 30% water change. the water became crystal clear.
I took out the bag of carbon after 24 hours because I figured the light shock would hurt the acros, I've heard of it before.
A week later, I put in about half as much carbon, and phosban.
By the end of the week, all my monti's were dead. Today, I woke up and my favorite millepora was dying.
I kept up with my dosing, and my weekly water changes. For the past 4 months, my water parameters have been PERFECT.
Today's water test gave me..
Nitrates: 0
Phosphates: 0
Calcium: 410
Alkalinity: 9.3
Magnesium: 1330
Salinity: 1.026
I'm sure the FWE was a problem, but why are MY SPS STILL DYING.
I should add that my equipment is a 250w Lumenmax 3 pendant w/ an EVC 20k bulb powered by an icecap ballast. I have a Warner Marine H1 HOB skimmer, and two Vortech MP10s creating perfect flow on a 28 gallon nano cube.