pH Controller for Calcium Reactor

S

Steven

So it looks like my Milwaukee pH controller is broken. The pH is measuring over the set point but the alarm light is not flashing and the power to the solenoid is not off so no CO2 is flowing.

I have had this controller for about 3.5 years.

Wanted to find out if this is still the controller that everyone recommends or if there is a different model that may be better.

Thanks
 
@Steven wrote:
So it looks like my Milwaukee pH controller is broken. The pH is measuring over the set point but the alarm light is not flashing and the power to the solenoid is not off so no CO2 is flowing. I have had this controller for about 3.5 years. Wanted to find out if this is still the controller that everyone recommends or if there is a different model that may be better. Thanks said:
I have been using a Milwaukee for over four years now without any problems. The other popular controller is the Pinpoint.
Click to expand...
 
The Milwaukee is the better of the two. I've tried the American Pinpoint and it was an exercise in frustration. The Milwaukee is much simpler. Perhaps you simply need a new pH probe? Mine is almost six years old and probably needs to be replaced this year.
 
I recalibrated the probe and it still is not working.
I have ordered a new Milwaukee controller.

Thanks for the input.
 
You must log in or register to reply here.
Top