need help

B

beetle69

I have a led light that I took apart. Now I need to wire it up but forgot how it goes. I have 4 drivers. The drivers are ELN-60-48D. 27 blue, 12 whites, 3 reds, 2 UV, 3 greens. Leds are Rapid led cree. I live in Grand Prairie. Willing to drive for help. Text me for info. Number is 214 6974561.
 
Did you go on the RapidLED site and look for their instructions?

http://www.vinnymarini.com/pictures/rapid_docs/LED%20DIY%20Oveview.pdf


David
 
That link that I sent to you has 2 pages. Page 2 doesn't have enough information for you to wire the drivers? That is all the info that I had to go by when I wired mine. I don't have any dimmable drivers though. Here is a link for wiring them:

http://www.vinnymarini.com/pictures/rapid_docs/Using%20Your%20Dimmable%20Driver.pdf



David
 
Depending on the led could be 13 per driver or you risk burning it up

Sent from my SCH-I535 using Tapatalk 2
 
@beetle69 wrote:
I tryed that but un sure how many leds for every driver. said:
You add up the forward voltages of each LED and make sure that you don't exceed the voltage of the driver, which is 48 volts in this case.

I would do the 12 whites on one, the red , green, uv, and 3 blues on one, and divide the rest of the blues on the other 2 drivers - 12 on each.


David
Click to expand...
 
Yes!

http://www.vinnymarini.com/pictures/rapid_docs/Using%20Your%20Dimmable%20Driver.pdf


David
 
You must log in or register to reply here.
Top