Need help finding a plumbing fitting in North Texas

R

ricksreef

Hey guys I am hoping someone will know where I can find one of these locally. This screws onto the back of a bulkhead and fits the thread the nut uses. You can cut your bulkhead length in 1/2 with these when you use them. Any help greatly appreciated I know where I can get hem online, but they are $2.99 on average and after ordering then online they double with shipping. Also if anyone knows who manufactures these I can get my plumbing store to order them.

Description:
•Model: PF-HR31-6200
90degree nut for 1 & 3/4 bulk heads
This 90 degree nut will work on the 1" and 3/4" bulk head fittings. Instead of coming straight out from the fitting, this nut forms a 90 degree bend. Takes 1" in the slip socket end. Dimensions are: Overall length 2.88", Overall Width 1.66" In stock, but currently at low levels. Fits the following bulkhead fittings:
 
You'd probably need to check with a plumbing supply like Mark's Plumbing. I would email them this picture though to make sure they actually have it before driving from Denton to Fort Worth. Mark's Plumbing is off Camp Bowie on the west side of town.
 
Thanks for the reply Marc, I called them and they didn't have that part, but I am going to head up and take a look. They have a location in Carrolton, TX as well. I noticed this is the distrubution center so I am hoping it is HUGE!

Here is that info if any local guys to Dallas want to go by and check them out. It's just north of I35 and 161.

Mark’s Plumbing
2720 commodore Dr , Carrollton TX
972-466-4104
 
You must log in or register to reply here.
Top