This is super easy. Only took me about 15 minutes and $30 including the pump.
Bought a Rio 90 85gph pump that has a 1/2 output
Bought a $14 10" gravel vac that had a 1/2 input
Took the gravel vac into lowes and picked out a few plumbing parts
Fit the parts into the vac. They don't have to be perfect. The only function for the top is to hold the chemi-pure down below the exit holes.
Put everything together and drill a hole all the way through. Put in a pin. I cut one that tapers a little so it won't push all the way through and can get tight.
Drilled some more holes through the vac up top (higher than the dark colored pipe) for the water to exit through.
All that's left is to connect the pump to the bottom of the reactor.
Bought a Rio 90 85gph pump that has a 1/2 output
Bought a $14 10" gravel vac that had a 1/2 input
Took the gravel vac into lowes and picked out a few plumbing parts
Fit the parts into the vac. They don't have to be perfect. The only function for the top is to hold the chemi-pure down below the exit holes.
Put everything together and drill a hole all the way through. Put in a pin. I cut one that tapers a little so it won't push all the way through and can get tight.
Drilled some more holes through the vac up top (higher than the dark colored pipe) for the water to exit through.
All that's left is to connect the pump to the bottom of the reactor.