Not clear on instructions says :
?? It enables the Kalkreaktor to expel trapped air more easily
Now, allow water to drip out from Outlet 1 as described below. Simultaneously,
connect an airline tubing to Outlet 2 and take water out slowly at 1 – 2 drips / min.
Water should now exit from Outlet 1 at a fast rate (ie: 40 drips / min. or higher) as well
as from Outlet 2 at a much slower rate. Dry your hands and plug in the Eheim. When the pump runs properly, it should be silent.
just want to be sure this is just for bleeding the system and you just use outlet 1 when dosing...i.e. 40 dpm = 10 /c02..I am using a small feed pump as well ...any help would be appreciated
?? It enables the Kalkreaktor to expel trapped air more easily
Now, allow water to drip out from Outlet 1 as described below. Simultaneously,
connect an airline tubing to Outlet 2 and take water out slowly at 1 – 2 drips / min.
Water should now exit from Outlet 1 at a fast rate (ie: 40 drips / min. or higher) as well
as from Outlet 2 at a much slower rate. Dry your hands and plug in the Eheim. When the pump runs properly, it should be silent.
just want to be sure this is just for bleeding the system and you just use outlet 1 when dosing...i.e. 40 dpm = 10 /c02..I am using a small feed pump as well ...any help would be appreciated
