I don't want to dimyself

T

tesfeld

Premium Member
[Does anybody know of an electrician who does work on the side or any electrician with good prices who would run some circuits for my tank? I have a bid of $300 so far and am hoping to do better. My panel is only about 30 ft from the tank and has room for 2 20 amp circuits.

TIA,]
 
[On the other hand... has anybody done this themselves and could give me some pointers? I have a simple working knowledge of wiring and breaker panels.]
 
[Wiring stuff up like this is really very simple. (if you know how :p )

Do you have a one or a two story house? It makes a big difference in how you pull your wires!

Scott.]



Edited By Scott Comstock on 1090255880
 
[One, and I can see where the current wires are run. My only main issue with doing it myself is insurance liability, fishing the walls, and how hot it will be in the attic unless i do it way earlyl.]
 
[Hi Tony, my hubby is an electrical engineer and we ran the circuits for my tanks ourselves (ok mostly him :)). If you want to give a call tonight Im sure he can talk you through it.]
 
You must log in or register to reply here.
Top