K_Red_Raider
Membership Expired
Ive got two MP power heads on two different tanks. On one tank the MP10 is powered by a DJ powerstrip and my question is will I have to unplug the battery back up each time that I want to feed pellets? When I feed pellets I turn all water flow off so that I have minimum waste plus I also have a blue spotted jawfish that wont venture too far from his hole. When I feed frozen food I put it in feed mode so that is no concern. But when I turn the pump off with the powerstrip will the battery kick in?
Also, I just got a MP40 for my 120 and have the same type of feeding schedule pellets in the morning and frozen at night. This tank is controlled by an Apex and I have a module to control the MP40 so I'm guessing that the battery backup will not come on when I put the controller on feed mode A, B, C, D. Am I right in thinking this or am I wrong?
Also, I just got a MP40 for my 120 and have the same type of feeding schedule pellets in the morning and frozen at night. This tank is controlled by an Apex and I have a module to control the MP40 so I'm guessing that the battery backup will not come on when I put the controller on feed mode A, B, C, D. Am I right in thinking this or am I wrong?