Check my ACJr program. My light won't come on.

C

coralreefer

Membership Expired
I just got my acjr hooked up through the web using acserial2web. Really cool. I can manipulate it using the Aquanotes App on my iPhone.

I havent finalized my program but wanted to setup my T51 lights to come on as dawn/dusk using the SUN function. Then T52 lights on for daylight. The T52 lights are on but the T51 are not. The FAN is not on either. Any help would be great.

63095018-e6a4-52fe.jpg
alt="">

63095018-e6e9-926b.jpg
alt="">
 
Hi,

Looks like your two fan cmds may be conflicting, you are telling it to come on 30 minutes after sunrise and also telling it to be off anytime after midnight. Is your temp probe connected???? Can you manually toggle T51 on/off??

Cheers,
 
I'll remove the default fan OFF statement. As far as a temp probe, I don't have one yet. I was just messing with the setup and getting it connected to the web. Now that I think about it, it's probably not on because of the temp probe. I'll get the rest of the parts and get it checked out in situ.

Thanks for the reply bimmerz. Sometimes someone else makes you think of something you are overlooking.
 
Yeah I think with out a temp probe it's defaulting everything that needs a temp reading so if you remove all the temp lines I think you should be ok from there and then when you get the temp probe just reinsert the temp lines. It's good to have the temp fail safes in there
 
Yep...without a probe I think it read's 122*. You may want to just use the temp for fan and heater control. Put extra temp failsafe's in so that your light's will progressivly turn off if temps rise above your set "safe" limit's.

Cheers,
 
You must log in or register to reply here.
Top