Search results

i have been out of the look. Is aptasia x the newest medication that they actually take in. I have no sucess with the aptasia x. Casey i will be adding some peppermints soon

finished this last night. 150 w14k hexarc/ /95 x 3 //1 actinic R// 2 actinic white all aluminum and stainless steel. Heat shrink connections. I siliconed the open areas of the endcaps. With this lighting rack i was not going for best par just conveinence and durability/safety as i am mostly...

my tang has some problems with the right side of his body. any ideas on what this is and how to treat it. Casey

I am interested in banking most of my sps with our members, I am moving soon and I also need to take down one of my tanks. Let me know if you are interested in banking some sps. I have tri color valida, blue tort, cali tort, green slimer, chesterfield acro, blue tip stag, ora teal stag, and some...

I am ordering a sheet of hdpe black for my tanks what thickness should it be do the thinner pecies 1/4" bow or are they ok. if so 1/2 may be my choice.

I found a small bit of pink buildup around my ph probe for ca reactor i cleaned it off manually and then put it in calibration fluid 4.01 before i cleaned it it read 4.5 in the solution after it read 4.0. is there some kind of homemade solution to clean these probes or do i need to order it. Casey

I have a little very short hair alge in my sand, i usually use a court jester or rainfordi goby but these have proven to be too small and my yellow tang does not like them (I have tried once and it did not survive) any suggestions on a slightly larger fish(or another critter) that will eat hair...

which mag is better for raising levels. chloride or sulfate. Casey

what does Dean from plano go by on here. thanks Casey

i have my reactor all set up. gen x media, 20lb co2 bottle, aquarium plants.com regulator, trigger systems ca reactor, i cant seem to add much alk to system i keep having to add bionic two part. my current effluent rate is 20 drips per minute controlled by needle valve on effluent hose and i...

or any other major events

I have this unit set up, its seems to not want to turn off on its own, right now ph in reactor is 6.5 and i have it set at 6.5 but the blinking light and solenoid are still on. Does it wait intill 6.50 or 6.4 or what , is there any danger in waiting an extended amount of time for it to turn off...

stocking list below Is this fish safe around clams and sps?

i need MY tank refilled not a switch out does anyone know a place in dallas /plano / richardson ?

ok i have some pictures of what i have been working on so far.

this is the framing of the stand i have been working on. 62"x26"36 high stand and tank size is 60x24x20 high with external overflow. More to come i am painting the stand. I missed last meeting it was my fiance's birthday, getting married on jul 28th! anyway having fun with the stand, screwed and...

I usually get 0 out of the DI but today i got 10. So i checked my r/o outlet and it is at 24. MY r/o membrane i bought last december. I ordered prefilter and carbon and di, will be here next week. Di was replaced a couple of months ago and is color change(not used up) testing at 14 tds drop...

I am thinking of getting a custom tank built. 60x28x15tall about 100 gal, my question is can I use just one overflow box in the corner. There will be alot of internal circulation so flow thru is not an issue.Or would you have two. Casey

this is from left side of tank. As you can see my rocks are white, i was told this is a phase and brushing will help purple come back. I get lots of purple everywhere else exept for main tank. I use 2 250w 10k xm 2 95w vho atinic. Excuse the bubbles right now i did some cleaning today. Decent...

If anyone out there uses ice cap mh i have a 250w that makes a ticking sound before it starts the bulb it stops as soon as the bulb is on, is this normal? thanks