Search results

Tank cycle in full swing. Added Fritz turbo start and using Dr Tim’s ammonium chloride for a fish less cycle. Was around 2ppm last night . Will post once cycled. Planning to start off with a couple of clowns as my first fish after quarantine .Have another pair in my old tank which I will move...

Nope. My first time going bare bottom. Plan to have plenty biomedia in the sump to hopefully help with the cycling . Thanks

Tank is finally filled after a slight leak in the sump. All good now . Need start the cycling next. Also the drains are a lot louder than I imagined . A lot of tuning required to get them quiet I imagine .

We have fillage :)

The Uv (55w lifeguard pro max 3” amalgam)is plumbed on the outside near my mixing station . This really delayed my tank build . I sadly cracked the Uv quartz trying to install the bulb yesterday so cannot test this side this week. Waiting for my replacement . That is off a 2nd return pump (...

Finally got my rock work done . Went for a lifted aqua scape inspired by a few videos I saw from reefers in Asia. Ready to fill some water now and do a tank & sump leak test

Has been a while since I posted pictures. Ended up having to convert some of the plumbing to US since I could not fit my UV anywhere under the tank so had to send plumbing to the garage . Posting some new pictures . Hoping to do a leak test next weekend

Tank has arrived . Lights are up. Thanks Marc & Ron for some excellent suggestions on the light hangers . Will end up adding a stay wire from the wall studs as a backup . Now for the real work. Seems like a long road but excited to get right into it . More to follow as I start adding equipment...

Thanks for the tip. Will probably attach a stay wire to the studs in the wall as a backup in case the wire hangers fail .

Thanks Marc, the vent is above it but closer to the front of the tank . Will have to think about preventing any drips. Thanks for that observation. As for the lights will probably attach a stay wire to the stud on the wall as a backup incase the drywall gives after a while. I won’t be attaching...

Installed the ceiling hanging kit for the radions rms rails today. Used heavy duty toggle bolt drywall anchors for those. Rated for 200+ lb. I hope it is installed correctly and will support the 50 lbs or so of lights and a future floating canopy (+ 20-30 lbs)

All the equipment has arrived . Now waiting for the tank to be delivered next week to start planing for the install .

Hello Fellow Reefers, Finally got around to purchasing & planning the setting up of my dream tank. It’s a Red Sea s-1000 g2 which will be delivered on Monday. Currently have a 75g but won’t be moving much over except for the apex and the power heads. Will eventually tear that down and put up for...

Thanks for the info on that. Ended up going with Fish Gallery who gave me a great rate on delivery and setup. VT

Hello , Does anyone offer an unboxing and setup of a redsea tank and stand in the Dallas area? If so what are the estimated rates please? This is just for a dry install . Unbox setup stand and set a 200 gallon tank on top . Thanks VT

Caught a couple more nems reduced to $40 each, any size. Got about 5-6

Hi, I recently signed up for membership but when I try to add the membership card to the Apple wallet, it says safari cannot download the file. Please advise what might be the issue . Thanks Vinay T

Only 2-3 rbta left $50 each

Reduced rbta $30 each .

Hello! Have some rbta to sell. $50 each . 2-3 Frags grew out but can cut to order. Bubble gum digi- 2” $20 Starburst Monti- Frags x 3 -$5. Can cut bigger frags $20 Purple Stylo- 2” - $20 Green Digi - 2-3” -$5 German Blue Digi- 2” $5 Location : Garland. Please PM if interested. Thanks !!